Last Few - Order Now
Trend 2/3 x 1/4 TCT Single Flute Cutter 4.0 x 11.0mm
These cutters are suitable for grooving, rebating, morticing and drilling. The single flute cutters offer fast free cutting. If you require a cleaner cut please use two flute cutters.
The depth of cut on cutters of 2.0mm diameter and below should be a maximum of 1.0mm per pass.
Small diameters in Tungsten Carbide must be handled with care to avoid breakage and very shallow passes must be made. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood and certain hardwoods
Single flute cutters must not be used in eccentric chucks.
Cutting Diameter (D): 4.0mm
Cutting Length (C): 11.0mm