Moderate Stock - Order Now
Forge Pull Handle - D - Aluminium Bar 225mm (9in)
A modern tubular alloy pull handle for bolt through fitting to doors which don't require a mortice latch.
Supplied with screws and fitting instructions.
1: Mark a vertical line on door face approx 75mm from door face on the side of door to which the handle will be installed.
2. Measure 2 points on this line for fixing holes dependant on handle size (either 225mm or 300mm apart).
3. Use a 8mm drillbit to drill the two fixing holes from the handle side of the door ensuring they are square to the door surface.
4. insert the two supplied bolts into the drilled holes from the opposite side and fasten into the handle profile.