Forge Door Bolt Necked - Aluminium 100mm (4in)
Forge internal door bolt used for securing doors or cupboards. The necked version can be used for outward opening doors.
Made from aluminium and supplied with all fixings and fitting instructions.
Size: 100mm (4 inch).
1. Postion door bolt on the door face so that the end of the doorbolt is in line with the door edge and mark the screwholes with a pencil.
2. Drill pilot holes using a Ø2mm drillbit and fasten in place using supplied screws.
3b. If being installed on an outward opening door use a necked version:- Drill a Ø8mm hole, 16mm deep in line with the bolt and screw the flat keep into position over this hole.