Leica Geosystems Lino L2P5 Line & Point Laser
The Leica Lino L2P5 projects a combination of long clear cross lines and points set at exact plumb or 90° angles. Easy to set-up, just switch on and the self levelling system compensates for up-to ±4° allowing you to concentrate on the job in hand. With a simple two button operation you can switch between horizontal, vertical or cross line projection.
The wide 180° aperture projects a long horizontal line which is perfect for levelling long areas or across multiple walls – for example when laying out a kitchen work surface.
Pulsing line can be selected to increase the laser range with use of a line detector (Leica Reference LLD2) for long distance or outside operation. This also activates the power saving mode, reducing power consumption by 40%.
The laser unit incorporates a lock function which protects the unit during transport and also allows the unit to project lines at an angle by tilting the unit. You can manually switch off the self-levelling using the lock function. The laser line can then be projected at any angle.
Minor angular misalignments of ±4° are compensated automatically. If the angular misalignment is greater, the device does not project any lines or dots.
Horizontal, vertical or cross line modes.
Points at 90°.
Pulse function with power-saving mode.
Exact 90° angles.
Range: 15m visible range / 30m with receiver.
Accuracy horizontal: ±1.5mm @ 5m.
Accuracy vertical: ±0.75mm @ 3m line length.
Protection Class: IP54 Dust and splash protected.
Self-levelling Range: 4° ± 0.5°.
Batteries: 4 x AA 1.5V.
Dimensions (HxDxW): 118 x 131 x 76mm.
Tripod Thread: 1/4in.
1x Leica Lino L2P5 Laser
1x Target plate
1x Magnetic multifunction adaptor
4x Alkaline batteries
1x Carrying Pouch