Leica Geosystems Lino L2 Cross Line Laser
The Leica Lino L2+ projects clear cross lines exactly, quickly and easily – self levelling to compensate for up-to ±4° allowing you to concentrate on the job in hand. With a simple two button operation you can switch between horizontal, vertical or cross line projection.
The wide 180° aperture projects a long horizontal line which is perfect for levelling long areas or across multiple walls – for example when laying out a kitchen work surface.
Pulsing line can be selected to increase the laser range with use of a line detector (Leica Reference LLD2) for long distance or outside operation. This also activates the power saving mode, reducing power consumption by 40%.
The laser unit incorporates a lock function which protects the unit during transport and also allows the unit to project lines at an angle by tilting the unit. You can manually switch off the self-levelling using the lock function. The laser line can then be projected at any angle.
Horizontal, vertical or cross line modes
Pulse function with power-saving mode
Exact 90° angle
Range: 15m visible range / 30m with receiver.
Accuracy horizontal: ± 1.5mm @ 5m.
Accuracy vertical: ± 0.75mm @ 3m line length.
Protection Class: IP54 Dust and splash protected.
Self-levelling Range: 4° ± 0.5°.
Batteries: Built in rechargeable pack.
Dimensions (HxDxW): 118 x 131 x 76mm.
Tripod Thread: 1/4in.
1 x Leica Lino L2+ Line Laser
1 x Target plate
1 x Magnetic multifunction adaptor
4 x AA batteries
1 x Carrying Pouch