The RPR400 roller stand is invaluable in workshops when working with timber which is larger than the table area the machine provides. The roller stand provides safe and easy support for these oversized pieces.
Whether working in limited workshop space, or on site from the back of a van, the ability to fold away and maximise working space is critical - the RPR400 folds away to just 3-Inch wide. By incorporating four non-slip rubber feet the RPR400 is rigid in use and will not cut into floor surfaces.
On many other roller stands the locking knob to secure the height of the stand is vertical to the roller carrier, therefore when heavy pressure is exerted on the roller it transmits directly on the knob and can cause the roller carrier to drop in height.
On the RPR400 the main roller carrier is at an angle to the locking knob and therefore reduces the pressure, which in turn stops the roller carrier from dropping.
Maximum Load: 68kg.
Maximum Height: 1,050mm.
Minimum Height: 635mm.
Pair of RPR400 Roller Stands.