Forge internal door packs with all the ironmongery needed to hang and furnish a door. Supplied with two latch handles, a 2.1/2in tubular mortice latch and two 75mm butt hinges. Ideal for doors of 35mm thickness 10-15kg.
Fitting Instructions: To Fit Door Handles:-
1. Measure the thickness of the door and cut the square spindle bar 60mm longer than this thickness.
2. Place the spindle bar through an existing tubular latch or lock and position one handle over the spindle bar. Ensure the handle is square, screw hole positions with a bradawl.
3. Drill 2mm pilot holes and reposition the handle before securing using the wood screws provided.
The brass finish short back plate handle has a straight lever for a modern contemporary look. Supplied with matching brass finish hinges and tubular latch.