Category Archives: Uncategorised

How to recycle household waste metal

(Last modified: December 6th, 2019)

At metals4U, we are passionate about recycling, while TV programmes like Blue Planet have also helped to highlight the devastation caused by single-use materials.

metas4U recycle household metal blog

But while much of our focus is on reducing the use and waste of plastic in our day-to-day lives, statistics released by the trade board, European Aluminium show that the UK falls below the current Eurpoean average for aluminum recycling.

Metal is a material that is endlessly recyclable – aluminum drinks cans can be on sale as another can in just 60 days – so it’s crucial we each play our own part in recycling our waste metal.

To highlight the issue, we analysed the latest YouGov data to find the UK areas which are the best and worst for recycling household waste metal.

The results help illustrate where education and information on metal recycling is required.

The worst offending UK areas for not recycling metal waste (percentage of residents who rarely recycle or never recycle)

  1. Kensington and Chelsea – 47%
  2. Dumfries and Galloway – 45%
  3. Inverclyde – 45%
  4. Southampton – 37%
  5. Brent – 35%
  6. Greenwich – 35%
  7. Tendring – 34%
  8. Rushmoor – 34%
  9. Perth and Kinross – 34%
  10. Barking and Dagehnham – 32%

The top ten best recyclers (percentage of residents who recycle all or almost all metal waste)

  1. Burnley – 94%
  2. Tandbridge – 88%
  3. Rossendale – 87%
  4. Isle of Anglesey – 87%
  5. Denbridgeshire – 85%
  6. Gwynedd – 84%
  7. Monmouthshire – 84%
  8. Ryedale – 82%
  9. Mole Valley – 82%
  10. Derbyshire Dales – 81%

Can I recycle my household metal?

There are several myths surrounding the recycling of household metal waste.

The reality is that most household metals can be recycled.

And as with all household waste, it’s important to rinse metal before recycling it to ensure it does not contaminate other recycled waste.

Which household metals can I recycle?

The metals below can be recycled easily in your regular recycle bin.

  • Drink cans
  • Food tins (push the tin lid inside the tin)
  • Chocolate/sweet tins
  • Aluminium foil (scrunch the foil together to form a ball)
  • Aluminum food trays and tubes (remove any plastic caps)
  • Aerosol cans (remove the plastic cap)

The following household metals CANNOT be recycled in home recycling collections

  • Laminated food pouches (pet food, baby puree pouches that spring back when you scrunch the pouch)
  • Crisp packets and chocolate/sweet wrappers
  • Household appliances that contain metal (white goods, kettles, irons)
  • Kitchen utensils and metal pots and pans
  • Metal containers for chemicals

Where can I recycle household metal?

Metals that can be recycled with regular home collections can be placed in your usual recycling bins.

Some metals that aren’t currently collected by your local council may be able to be collected by third-party collectors, such as TerraCycle.

Recycle Now has a great guide on where and how to recycle most every-day objects.

Do you know your periodic table metals?

(Last modified: November 20th, 2019)

We tested the nation to see if they knew their periodic table metals and whether they could match them to the correct symbols, and the results showed that more than a quarter couldn’t get them right.

Only 3% of 2,002 people tested got every question correct, while more than a quarter couldn’t guess a single periodic symbol for a metal.

periodic table, metals4U blog

People were also stumped by our fake metals, which we hid among the answers.

The fakes included Vibranium, from Marvel’s Black Panther movie, and Carbonadium and Omnium, both from X-Men.

Since so many have been left baffled, we have created a quiz featuring GCSE level questions. Will you fare any better?



Real or Fake: Seven questions you should ask before buying jewellery.

(Last modified: September 26th, 2019)

real or fake metals4U blog

Whether treating yourself or splashing out on a gift for a friend or loved one, buying jewellery can be far from a simple process, especially when there’s a lot of money changing hands.

If you’re making a significant investment in an item, it’s important to guard against being ripped off.

Here are seven questions you should ask yourself before purchasing an expensive piece of jewellery.


How much is it? 

real or fake metals4U blog

There’s an old saying that suggests if something seems too good to be true then it probably is.

Before you enter a shop to make a purchase, do a little research.

How much are other places charging for the item you’re after? If the price you’re quoted is significantly lower than the figures you’ve seen previously then there should be a reasonable explanation.

The jewellery industry isn’t known for offering huge discounts, so be cautious next time you think you’ve spotted a bargain.


Who’s the seller?

These days, all kinds of shops stock jewellery and there’s no hard and fast rule to suggest which types of stockists are reputable and which aren’t.

But it’s worth researching the business before you make a purchase.

How long have they been trading? What do other customers say about them? Do they belong to any official organisations?

Be especially wary of buying jewellery from individuals on social media or online auction websites.

It’s easier to return an item you’re dissatisfied with to a shop or website than to an individual on Facebook, who could very easily disappear without a trace.

If you are buying from somebody online, make sure you check their reviews and always insist on real photographs of the item you’re buying – not stock images or snaps from a catalogue.


Can you return it?

real or fake metals4U blog

Some shops operate a ‘no returns’ policy and these places are very much best avoided when purchasing expensive jewellery.

Many jewellers offer up to a month for returns, which allows you to change your mind, and gives you time to check the authenticity of anything you buy.

You may find that what you purchased wasn’t what you were expecting, so clarifying with the seller that you are able to bring it back, should you wish, is important.

All good jewellers will offer you the opportunity to return an item.

Can you spot the relevant hallmarks?

real or fake metals4U blog

The Hallmarking Act dictates that all jewellery sold in the UK must carry hallmarking symbols that identify it as either gold, silver, palladium or platinum.

Hallmarks verify the metal purity of items and help you better understand the overall quality of what you’re buying.

So, before you head out to buy an item, learn the hallmark that relates to what you want, so you know what to look out for.

Also, be wary of fake hallmarks and pay close attention to fonts, layouts and spelling.


What’s the build quality like?

real or fake metals4U blog

There are several ways to tell if an item of jewellery is of a low build quality.

Check the links of bracelets and necklaces for pinch points as this is a sign of poor construction. Chain links should be smooth and solid.

All stones in jewellery should be properly mounted, not just glued, though imperfections on the stone itself do not necessarily indicate poor quality.

Gemstones and diamonds are formed naturally, so don’t be alarmed if you spot the odd fleck or narrow angle.

If the stone seems overly smooth, it can sometimes indicate that it’s been created using a mixture of glass and plastic.


What paperwork comes with it?

real or fake metals4U blog

All jewellery containing diamonds should come with a certificate of authenticity, ratified by a body like the GIA, IGA or EGL.

Be sure to ask for this if it isn’t provided straight away – and if the seller is unable to produce a certificate then it’s probably a sign that something’s amiss.

You should also request information about the manufacturer and enquire about cleaning instructions.

A good jeweller will have this information to hand and the documentation will be of a high quality.


Have you consulted somebody you trust?

real or fake metals4U blog

If you’re lucky, you may already know and trust the seller, but often you are entering into a significant transaction with somebody you’ve never met, so don’t be afraid to get a second opinion.

Bring along a close friend or relative and get their view on any items you are considering.

As it isn’t their money, they’re in a better position to either provide validation that you’re doing the right thing – or convince you that you need to think again!


Can you tell the difference between real and fake jewellery?

Take our visual test: 



How to cut metal; a focus on safety

(Last modified: March 21st, 2019)

Most metal working projects will require cuts to be made during fabrication. There are many different cutting methods and equipment options available ranging from simple hand tools to industrial specialist machinery. Although all methods will result in a cut being made through metal, it is really important to choose the most appropriate process for the specified task. By understanding how the tools work, and how and when to use each method, it will be easier to make the right choice first time- saving time, money, and of course, maintaining workshop safety.

A note on safety.

When performing any task involving metal, safety should be a priority. Always follow the safety procedures laid down by workplace protocols and any training courses attended. If there are any concerns relating to workshop safety, these publications are available as free downloads from the HSE website; ‘Health and Safety in Engineering Workshops’   and  ‘The safe use of compressed gases in welding, flame cutting and allied processes’.

Personal Protective Equipment should never be overlooked, even if you think the task will be quicker to complete than hunting down your safety equipment, it is never worth the risk. PPE can help protect from burns, cuts, and metal chips becoming embedded in skin and eyes.

PPE safety sign metals4U

PPE should include;

  • A full-face welding mask for plasma cutting and protective eyewear as a minimum for all other cutting methods.
  • Ear defenders as the noise from machinery can permanently damage hearing and has been linked to the onset of tinnitus.
  • Sturdy foot protection, no-one really wants hot sparks flying in their shoes- reinforced toe boots make sense when cutting metal in case the offcut falls.
  • Long sleeved tops and full-length trousers to protect skin from hot sparks and metal chips travelling at high speed.
  • Protective gloves- make sure these are fit for purpose; holes and splits will offer no protection and if they don’t fit properly, they will restrict your movement.

Tool Safety.

saw blade metals4U

  • Always ensure tools are well maintained; check switches, cables, and consumables for signs of damage or wear and ensure blades are sharp- a dull blade is more likely to slip and jump on the metal surface which can damage the metal and lead to injury.
  • Replace consumables, such as blades and cutting discs, once signs of heavy use appear.
  • Always ensure you disconnect tools from the power supply before replacing the blades or performing any adjustments to the settings.

Workshop safety.

workshop metals4U

  • Keep the floor and surfaces free from clutter, trailing flexes, and debris.
  • Take your time- Rushing about in a workshop environment can increase the risk of trips, slips and injury.
  • Wipe up spills immediately to reduce the risk of liquids coming into contact with electrical items.
  • Take extra care when handling flammable substances.
  • Do not let children into the workshop unsupervised, if they are watching an adult work, they should also be provided with suitable PPE.

Following the above suggestions should help keep you safe while cutting metal in the workplace or home workshop.

To find out about all the different types of metal cutting processes and guidance on how to perform them, please click on the links below.


score and snap tools metals4U

Cutting metal using score and snap

reciprocating saw metals4U

Cutting metal with a reciprocating saw








cnc guillotine metals4U

Cutting metal with a guillotine

tin snips metals4U

Cutting metal with tin snips






chop saw metals4U

Cutting metal with a chopsaw and mitre saw

pipe cutter

Cutting metal with a pipe cutter







metals4U jigsaw

Cutting metal with a jigsaw

metals4U angle grinder

Cutting metal with an angle grinder or disc cutter







metals4u hacksaw

Cutting metal with a hacksaw

metals4U bandsaw

Cutting metal with a bandsaw






metals4U circular saw

Cutting metal with a circular saw

metals4U plasma cutting

Cutting metal with a plasma cutter








How to cut metal with a circular saw

(Last modified: March 21st, 2019)

Circular saws work on the same principle as a mitre or chop saw, however, a circular saw is not fixed to a cutting plinth; this gives complete freedom over the cutting movement to enable freehand straight and gently curved cuts to achieved. As with most power tools, models vary in price depending on extra features incorporated to improve the user experience. For occasional use a standard basic model will adequately perform metal cutting applications, however, for more frequent or robust projects it will be worth investing in a heavy-duty model. When using a circular saw for cutting metal it is important to ensure it has an enclosed motor housing to protect the motor from damage caused by metal chips.

metals4U circular saw

Circular saws are held with both hands to support and guide the blade through the workpiece, the saw is always used in a ‘pushing away’ motion with the rear of the blade covered by a guard that moves to surround the blade in response to the position of the workpiece; the top of the blade is covered by a fixed guard. Most models have an additional handle to enable the best hand positioning while working and a guide rail system to line up with cutting lines.

Choosing the correct blade is important to maintain safety and to ensure an accurate cut. Only blades and discs specified for cutting metal should be used. These professional blades are perfect for cutting through aluminium, copper, lead and other non-ferrous metals; while these diamond cutting discs will make light work of cutting through stainless steel.

Tips for cutting metal with a circular saw.

  • In addition to standard safety equipment such as eye, hand, and ear protection, it is also recommended to wear long sleeves to protect skin from hot and sharp metal chips that will fly from the blade at high speed.
  • Before connecting the saw to a power supply, select the correct blade for the project and adjust the circular saw settings to ensure all fittings and attachments are correctly aligned and tightened. The cutting depth of the blade should not be set to exceed ¼ inch (6mm) beyond the thickness of the metal.
  • Mark the cutting line with a marker or scoring scribe and firmly fix the workpiece with clamps. Ensure the blade has clearance on the underside, if it does not then the metal can be mounted on rails or across two work horses.
  • Connect the power, then align the blade with the proposed cutting line without the blade being in contact with the metal edge, use the cutting guides to help. Slowly depress the trigger to power up the blade, once it has come up to speed, carefully slide the blade into the metal- do not rush or force the cut, just let the blade do the work.
  • Regularly apply cutting fluid as the saw travels the length of the cut to reduce heat and allow a clean cut.
  • Once the cut is complete, disconnect the power supply to the saw. Do not touch the cut edge or the blade after cutting as they will be hot enough to cause a burn.

How to cut metal with a bandsaw

(Last modified: March 21st, 2019)

Bandsaws are a power tool that have a looped metal cutting blade tensioned over 2 pulleys. The top pulley retains and guides the blade, while the lower pulley varies the speed. The blade runs in one direction rather than with the ‘up and down’ movement of a jig saw.  Bandsaws are not suitable for cutting very thin sheet metal; a rule of thumb suggests the metal to be cut should be thicker than the depth of 3 bandsaw blade teeth, however they are excellent for cutting thin walled profiles such as box and angle.

metals4U bandsaw

Blades are available in different widths suited for different cutting requirements; thicker blades work well for thicker metal stock and straight cuts, whereas a thinner blade is better suited to cutting curves. Blades with a higher tpi provide a smoother cut edge whereas blades with a lower tpi make light work of cutting through thicker metal stock.

Bandsaws are available as cordless units, bench top models, and as freestanding floor models.  As with most power tools, the range of extra features increases from standard settings on smaller DIY models to a fully comprehensive range of additional features available on the more professional models, extra features may include mitre cutting settings, more variable speed settings, and hydraulic descent in addition to standard manual descent. Bandsaw speed settings are measured in either metres per minute (mpm) or the more standard revolutions per minute (rpm).

Tips for cutting metal with a bandsaw.

  • Ensure correct PPE including eye and ear protection is worn.
  • Mark or score the cut line if necessary.
  • Ensure that the blade is suitable for cutting metal and that it is correctly fitted and tensioned.
  • Make sure all blade guards are in the correct position and free from defect.
  • Adjust all settings for the type of cut being performed; such as speed and mitre angle for example.
  • Connect the power and make sure all cables are out of the way of the blade, then start the machine.
  • When using a bandsaw set in the vertical position, cutting is achieved by resting the metal on the plate and pushing it towards the blade while maintaining pressure. The blade can pass completely through the workpiece or the workpiece can be simply withdrawn, rotated and pushed towards the blade again to make additional cuts.
    • If cutting an intricate design, it is advisable to make a series of relief cuts to reduce any binding on the blade.
    • When cutting curves, it is best to start at the shallowest angle of the curve and work towards the steepest angle to reduce the risk of the blade veering off from the cut line. If both ends of the curve are shallow, make a cut from each end until they meet at the middle.
  • For cuts using the hydraulic arm capabilities of some bandsaw models, place the metal on the support table and ensure it is firmly held against the rear guard, lower the arm to move the blade downwards through the workpiece.
  • For cuts using a cordless bandsaw; ensure the workpiece is secure, line up the blade to the intended cut line and lower the blade into the metal. Once the cut has been made, stop the blade and withdraw.
  • If the blade begins to stick or bind, stop the blade and apply some wax stick directly to the teeth of the blade.

How to cut metal with a hacksaw

(Last modified: March 21st, 2019)

Hacksaws are a hand tool that is a very versatile addition to any workshop. Hacksaws work by simply moving the blade through the metal backwards and forwards in a regular ‘sawing’ action. The C shaped handles are relatively cheap to buy and the wide range of blades available enables a wide range of profile thickness and metal grades to be cut easily. The handles range from basic varieties that simply, yet securely, hold the hack saw blade in place through to professional varieties that have easy to use features such as; thumb dial tensioners in the handle to provide 150kg or 30,00 psi blade tension, adjustment to accommodate 250mm or 300mm blades, and  secondary blade positioning to enable 45° blade angle for flush cutting or 90° for general cutting.

metals4u hacksaw

Hacksaw blades are selected by choosing the correct tpi (teeth per inch) for the type of metal that needs to be cut. The higher the tpi, the more aggressive the cut. The teeth are configured to face towards one end of the blade and the blades can be mounted in the handle with the teeth facing forwards or backwards- the benefit of this is that the power of the ‘towards’ or ‘away’ stroke can be focussed to provide the user with the best cutting ergonomics. Many metal workers prefer to focus the main cutting stroke as the ‘away’ stroke as this provides a clearer view of the cut because the chips are moved forwards during operation.

Hacksaw blade tpi recommendations.

Tpi  (teeth per inch / 25mm of blade)

Suggested usage


Large profiles, aluminium, softer metals


General workshop projects


Steel plate up to 5/6mm thickness


Hollow sections and steel tubing


Tips for cutting metal using a hacksaw.

  • Always wear eye protection and gloves when cutting metal.
  • Select the correct blade for the project being undertaken and ensure it is securely inserted in the frame/ handle with the teeth facing either forwards or backwards depending on preference.
  • Check the blade is rigid, correctly aligned, and taut.
  • Clamp the workpiece or place it in a vice; if this is not possible as the metal is joined to another object, ensure the piece you are not wishing to remove will remain secure once the other piece has been cut off.
  • To begin the cut, make a series of one-way strokes against the direction of the teeth – this will create a narrow incision that the blade can sit in. Once the blade has gained purchase in a millimetre or so of the surface, the full forward and backwards sawing action will soon enable the cut off to be completed.
  • Try not to rush; a smooth, steady sawing action will provide the best cut and will reduce the likelihood of the blade overheating and breaking. A little machine oil or cutting fluid placed on the blade will reduce friction.

How to cut metal with an angle grinder or disc cutter

(Last modified: March 21st, 2019)

Most home and commercial workshops contain an angle grinder as they are one of the most versatile tools; by simply changing the disc you can quickly and easily perform a range of tasks such as cutting metal, stripping rust and paint, deburring, preparing metal for welding tasks, scoring and cutting stone, tiles, and concrete, and cutting out mortar.

metals4U angle grinder

For small or infrequent jobs, an abrasive metal cutting disc can be used on an electric drill with the aid of a backing pad to support the disc; for regular or more heavy-duty applications, a disc cutter or angle grinder will give the best results.

Tips for cutting metal with an angle grinder, disc cutter, and rotary tool.

  • The discs rotate very quickly which will results in hot sparks and chips flying off at speed. Eye protection, heavy duty work gloves, protective footwear and ear protectors are all recommended to keep you safe.
  • Begin by selecting the disc best suited for your project and check that the maximum rpm of the disc is higher than the maximum rpm of the tool; this will protect against the disc becoming over-stressed and fracturing which can cause serious injury.
  • Discs are available in flat, raised centre, and depressed centre presentations. Raised and depressed centre discs are perfect for getting into tight corners and overhangs as they allow for a different angle of entry into the metal; these discs should not be driven too deep as the altered geometry of the disc can get in the way and damage the disc.

Suggested disc types.

Type of disc

Uses Notes

Metal cutting disc / cut off disc

Cutting most metals. Must not be used for grinding. Present at 90° to the workpiece

Cutting edge composed of Aluminium Oxide

Grinding disc

Grinding through ferrous and non- ferrous metals. Present at 45° to the workpiece.

Cutting edge composed of Aluminium Oxide

Multi-cut cutting disc

Cutting through ferrous and non- ferrous metals, (including stainless steel). Will also cut through brick, stone, modern composites & tiles for more complex cutting requirements.

Stainless steel cutting disc



Cutting through steel and stainless steel. Particularly useful for small cross sections.

All cut diamond blade


Cutting through cast iron, other ferrous and non- ferrous metals and most construction materials

Diamond grains bonded to cutting edge.

Abrasive grit mop disc


General grinding of metal, particularly useful for edge grinding projects such as de-burring, sharpening, and surface finishing.

Fan shaped radial configuration of grinding flaps.

Slitting disc / thin cutting disc


Cutting slim walled profiles and pipes. Provides a fine cut line. Suitable for use on ferrous and non-ferrous metals and stainless steel.

Thin cutting discs generate less heat during operation, create less tool vibration, completes cut in less time, and less metal wasted in each cut- this can save up to 2mm per cut.

  • Securely clamp the workpiece near to the intended cutting point or ensure the piece you are cutting from is secure and will not drop or fall during working.
  • Check the tool and disc mounting is correctly set up by running the grinder for a minute or so to ensure any balance or fitting problems are discovered before starting work.
  • When beginning the cut always present the blade at 90° to the workpiece taking care to ensure the guard is positioned between the worker and the workpiece. Avoid using impact or bumping the disc into the metal and always present the cutting blade where the metal is thinnest- round profiles are easiest as the surface contact is uniform, profiles such as ‘I beams’ and box section should be started at a corner to reduce friction. Do not apply too much pressure, just let the disc do the work.
  • The use of a  mill bastard file   is useful after angle grinding to de-burr and smooth the rough cut edge if required.

How to cut metal with a jigsaw

(Last modified: March 21st, 2019)

A jigsaw is a hand-held power tool that is operated by a squeeze trigger in the handle and is designed to cut sheet metal, pipework and wood. As with most power tools, jigsaws vary in the features they offer; for the hobbyist or DIY enthusiast a standard model fitted with the right blade will handle most workshop jobs with ease. For heavy-duty metal cutting, a more robust professional jigsaw would be more suitable as these can cut through 10mm steel and up to 30mm thickness on non-ferrous metals.

metals4U jigsaw

Jigsaws are not suitable for plunge cutting metal, however, a hole can be drilled to feed the blade through and then the cut can be continued in the usual way. Jigsaws have good manoeuvrability which makes them ideal to cut quite intricate shapes;, on tight curves it is advisable to make relief cuts to reduce the risk of the blade binding, however, this will only be possible if the cut off side is scrap, otherwise, it may be possible to get as far into the curve as possible then withdraw the blade and approach the curve from the uncut end.

Jigsaw blades have a single row of teeth along one edge of the blade, these are arranged in a small wave pattern from left to right- a blade with 21-24 tpi is recommended for cutting metal and one manufactured with a bi-metal construction will offer the best durability.

Tips for cutting metal with a jigsaw.

  • Wear appropriate PPE, this should include eye and ear protection and good quality gloves. The cut off metal will fall, it is prudent to wear sturdy, reinforced toe work shoes or boots.
  • Mark out or score the cut lines.
  • Securely clamp the workpiece to the work bench. If there will not be sufficient depth clearance for the blade, the metal can be placed on rails and then clamped to ensure blade clearance. Some metalworkers ‘sandwich’ the metal sheet between two thin sheets of wood to add support while cutting- this technique will take longer but will help minimise distortion on soft or thin metal.
  • With the power supply turned off, select the appropriate blade and insert it into the saw, ensure it is secure and correctly tightened. This is also a good time to check the settings are correct for cutting metal; this will include making sure the blade is set in a straight down position for metal cutting and not angled forward on the wood setting. If the surface of the metal will mark easily, the shoe of the saw can be covered with masking tape to help protect the surface finish. When all settings are correct, keeping fingers clear from the trigger switch, switch on the power.
  • If starting the cut at the edge, press the saw shoe firmly on the surface of the workpiece without the blade touching the metal. Slowly depress the trigger and once the blade is moving, glide it into the workpiece. It is important not to force the speed of the cut and just let the blade do the work. If starting the cut away from the edge of the workpiece, simply drill a hole large enough to insert the blade in and continue as above.
  • Once the cut is underway, pause the saw and add a few drops of tapping and cutting fluid to the cut to reduce heat at the blade then continue. Apply cutting fluid as required.
  • Move clamps and rotate the work as necessary to gain the best positioning of the saw to achieve the best cutting line.

How to cut metal with a pipe cutter

(Last modified: March 21st, 2019)

Pipe cutters are a simple hand-held tool that easily cuts through steel, copper, bronze and aluminium tube sections. The tool is constructed in a ‘C’ shape that has rollers and a cutting blade set within the inside edge.

pipe cutter

Some models need to be manually adjusted while cutting to decrease the aperture and others are self-adjusting. The more basic pipe cutters have a fixed cutting diameter and more professional models can cut pipe with a diameter of between 8mm and 35mm.  Pipe cutters are also available in a choice of handled or non-handled, both perform the same cutting action, however, it is a matter of personal choice of which type to use. A range of pipe cutters can be viewed here.

Tips for cutting metal with a pipe cutter.

  • Ensure eye protection and gloves are worn.
  • Measure the pipe or tube and mark where the cut will be.
  • Put the pipe cutter over the end of the pipe and slide it along until it reaches the cut point.
  • Tighten the grip on the tools and twist the cutter around the pipe until the blade cuts through. If using a manually adjusted pipe cutter it will require tightening after 3 or 4 turns, however, whichever model is used it will only take a few revolutions.
  • Deburr the cut end with a mill file or abrasive paper if required.